Home
About Maccor
Products
  Lab Equipment
    Series 4000
    Model 4200
    Model 4300
    Model 4304
    Series 4600
  Primary Cell Testers
    Series 3600
    Series 3650
  Formation
  Electrochemical
  Software
  Options
  Accessories
    Temperature Chamber
Why Choose Maccor?
Contact Us
Worldwide
Location Map

Series 4600

The multifunction SERIES 4600 secondary cell test systems have been engineered to provide high capabilities for large scale single cell testing. Each test position: Operates independently of the other positions; Can be user programmed to run a wide range of multi step tests; Can be user programmed to operate in steps of constant current, constant power, constant voltage, or constant resistance.

The Series 4600 is supplied as a complete turnkey system with PC computer and software. Each system is available from a desktop model to large test and quality control models with thousands of test positions. Desktop models are usually available from stock.

Powered by Maccor's standard battery testing software and utilizing similar technology as found in Maccor's high precision Series 4000 laboratory test systems, the Series 4600's are ideal for today's testing standards. During the test, data is recorded at operator specified intervals. At any time during the test, data can be viewed or plotted. The software can be configured to automatically add key test data to Maccor's MIMS database. Additionally, custom data handling interfaces or user interfaces can be purchased.

The Model 4600 has a Phoenix connector interface with horizontal cell configuration providing a dense and compact configuration. Each cabinet (standard 19" rack) can have up to 192 test positions. The Model 4600 is also available in a desktop cabinet with 32-test positions.

The Model 4650 has a Powerpole® interface with vertical cell configuration. The 4650 has a slightly larger footprint than the 4600, each cabinet can be configured with as many as 256 test positions.

For production and quality control systems, test positions can be accessed remotely with a PC over a wireless network interface allowing the operator to view, start, and stop tests directly at the cell interface. For more information contact Maccor's Sales Department.

Specifications

Number of Test Channels:	32 to 256 per system
Voltage Measurement Range:	0 V to +5 V
Voltage Accuracy:	±5 mV
Minimum Discharge Voltage:	0.2 volts or 0.35 × Current, whichever is greater
Voltage Resolution:	16 bit
Current Range:	2500 mA Full Scale
Current Accuracy:	±2.5 mA
Maximum Charge Current:	60 Amps per 32 Cell Module
Current Resolution:	16 bit
Time Resolution:	50 mS
Minimum Step Time:	500 mS
Data Recording Rate:	200 data points per second per system standard
Operating Modes:	Constant Current, Constant Voltage, Constant Power, Constant Resistance
Number of Steps per Test:	127 standard plus subroutines